Dishes for a dollhouse made from poker chips

I used an engraver to make a design on the chips.

After engraving a design on the chips I smothered gold paint all over the chips and wiped off the gold paint some of the paint will stay in the grooves.

Here's a closeup.

Here's another closeup. You can make any design, even edge in a name.

Making a dollhouse bed from two different wood boxes

These are the two boxes that I used.  One of the boxes opens up with a hinge, the other is just a bottom piece of a box.  The first thing I did was take off the hinges off the one box, the top of this box will be the headboard of a bed.  The bottom of the box will be a bookcase. The other box will be the bed frame.

In this picture on the left is the bookcase, I took the pieces of wood that were on the inside and turned them into shelves. The decorative pieces came off a wooden hand fan. There is also lace on the top edge.  On the right is the bed which still needs a mattress and blanket and pillow, I will post it when it is finished.  I used a piece off a necklace for a decoration, pieces of a wooden fan and lace.

How to make tea cups a plates for your dollhouse from battery candles, poker chips

This is a battery operated candle which you will be using.

First take the bottom off the candle.  Then take out the metal on the inside, I used plyiers and a pick.

On the side of the candle you will see this which is the part that holds on the suction cup.  I used a razor knife to take it off. This will be the handle for your tea cup.

In this picture is the handle glued on.

Here are two different kind of chips, one is a poker chip and the other is a bingo chip.

I painted both to match the tea cups.

This is what the finished cup and saucer look like.  You can make the cups and saucers any color you want for your dollhouse.  You could also add stickers on the plate and cup if you want. The bingo chip can be a dessert dish.

Making two minature pots for a dollhouse out of a baby formula scooper

This is the type of scooper I am talking about.

Here's what the scooper looks like to start off.

In this picture you can see I cut the scooper in half through the middle.  I also cut the handle in half.  The next thing you need to do is glue the other handle on the other piece that doesn't have a handle yet.

This is what it will look like upside down with the handle glued on.

You will need to add a piece of foam on the bottom of the pot.

This is what both the pots will look like.  Time to spray paint them with a copper color.

Here they are, you can make them any color you would want them.

How to make a decorative piece that lights up with a solar light for your dollhouse

In this picture you will see pieces from a hose connection and little glass balloons.

The first thing you do is glue the balloon into the hose connection piece.

Next you need the top of a solar light piece which you can buy for 97 cents in Walmart.

In this picture you can see it lit up with the solar light.

This is a green one.

Here's a red one.  I use solar lights for a lot of different items.

Making a medicine cabinet for a dollhouse out of a shaver cartridge holder

This is an empty shaver cartridge that holds the cartridges for a shaver.

You need to cut out a piece of cardboard the size of the catridge, this is going to be the door.

You then use some duct tape and tape the one side to hold the cardboard to the catridge, this is the door hinge for the medicine cabinet.

Cut some strips of cardboard which will be used for trim work.

Glue pieces of the strip onto the door.

These decorative circles were cut off a tissue box, I use them for different crafts. I'm cutting one in half for the medicine cabinet.

This is the medicine cabinet painted and the decorative circle added.  In the center you will see an oval looking mirror.  What this mirror is is:  I use old DVDs or old CDs that I don't want.  I usually buy ones from garage sales cheap with songs on them that no one wants.  I then boil some water on the stove in a pot and use pliers to hold the DVD/ cd in the water so it gets soft.  I then cut it with kitchen scissors, if it starts getting hard I dunk it again.  As you can see it looks like a mirror.  You can also make mirrors for on dollhouse walls this way.  

This is the inside of the medicine cabinet.  Use your imagination, the ideas are endless.