Ad sense auto

Google analytics

Showing posts with label Statue. Show all posts
Showing posts with label Statue. Show all posts

Tuesday, March 5, 2019

Making a beauty and the beast themed room in a dollhouse

If you look at this picture you can see the attic, the room is very blah.  I decided to make it a beauty and the beast room.


I printed these pictures off the internet under google searching painted mural ceilings.  I am going to paint the ceiling a dark purple color and glue these on both sides of the ceiling.


I also looked up stained glass windows for beauty and the beast. I printed out a lot of these. I'm using them for the back wall in the attic area you will see this in the pictures.


In this picture you can see the purple ceiling and the picture that I mod podged on the ceiling.  After the mod podge dried I put a coat of mod podge over top of the picture to seal it.  I also used some chess pieces for statues that I lined up going down the sides of the attic area.  In beauty and the beast beauty was looking at statues down the hallway on the way to her room.  I also looked up what the floor looked like in the movie and painted a little different floor like the one in the movie.


This is the attic on the other side of the room.  As you can see I did the same thing on this side.  I also added some figures.  The purple decorative looking fence is from a plastic barbie dollhouse that someone threw in the garbage.  Never turn your back on any type of dollhouse that is broken there are many pieces you can take apart and use.


If you look at the back wall you can see how I used the stained glass panels. I mod podged them on the back wall spaced like windows.  I painted with black paint triangle looking designs to give the panels a different look.  I also added a little statue of a castle by the back wall.  You can make any room in a dollhouse a theme.  Use your imagination and it will soar!


Tuesday, February 19, 2019

Making a beautiful display for your dollhouse

You will need a candlestick holder, you can see the one I used.


You also need one of these plastic containers from a bubblegum machine.



I used two small elephants for this project.


You also need felt.


I also used pieces of fake greenery.


Also a cap from your laundry detergent.


I use tacky glue for some things in this project.


I also use E6000.


I first took the laundry detergent cap and glued down a piece of green felt on it with tacky glue.


Then I used hot glue to glue down the piece of greenery.


Then I glued down the statue I wanted to use. I’m using an elephant charm.


Then using e6000 I glue the cap into the top bubblegum cap.


Then I glue the bubble gum holder back together again.


Then it gets glued down onto the candlestick holder.  You can use any item you want to, use your imagination and it will soar!


Thursday, December 27, 2018

Fixing a collector Necco Gremlin, made of a heavy resin type material

The gremlin can be seen in this photo.  Both arms were broken off, the right ear was broken off the spike on the back of it was cracked on the bottom area and was about to fall off.  There were also large chunks missing out of it. You can see the one arm in this photo. The back of both knees had cracks that needed to be repaired also.      



 
In this picture you can see the other arm that was broken off and large chunks that were missing.

In this photo this is one of the ears that was broken off.  In a moment I will tell you what I used for the glue, not something that you pay a lot of money for but something different.
     
Here’s what the one arm looked like when I glued it together.  You can see a chunk missing out of the arm on top.

 
In this photo you can see both the arms had the chunks that were missing filled and also glued together.

In this picture you can see the spike is cracked.

In this picture you can see where i repaired the spike. 
This is the back of the gremlin once the repairs with the glue were made.

This is a side view.

This is the finished statue after it was painted with paint to match.  The glue that i used was wood glue mixed with flour, yes flour.  Strange combination but first you put wood glue into a throw away type plastic cup ( i use yogurt cups) and add enough flour to make a thick consistancy if you add to much flour add some more wood glue stir with a popsicle stick.  You will use this to fill cracks and to glue pieces together.  For the areas that have large chunks missing first you fill the hole with the same stuffing material you use for filling a pillow then you put this mixture over top of the hole and smooth out with a popsicle stick, sometimes i will use my finger, this mixture can be scrubbed off your hands with a scrub sponge thats what i use As it sets it smoothes out itself.  This can also be used for outside statues made of a resin material.  When it sets it will be as hard as a rock.  There were only 500 of these statues made, it was truly a piece to fix and not discard.  Why throw out a statue when you can fix it and make it appear new again.  Gizmo has his friend back again!