Making a decoration around a mosaic window on a dollhouse

In this picture you can see a small square window on a dollhouse.  The first thing I did was make this window look like a fake stained glass window using nail polish, it is transparent when it dries and looks great and the lines for the lead look I use black paint pens to make the lines.

In this picture I did all my stained glass looking windows. Next to add to the square window, I don’t like how it gets lost on the house.

I’m sure you have seen these folding fans at garage sales, flea markets etc.  I will be using pieces off it.

In this picture you can see the pieces I cut off the fan blades, don’t throw any of the other pieces out they can be used for other projects.

In this picture you can see that square window now sticks up for itself.  Use your imagination with the stained glass look, the decorations and you can change the look of any window. I made another blog that shows you how I make fake stained glass windows. Check out my other blogs. Use your imagination and it will soar!

Making dollhouse planters from closet door slats

Just in case someone out there doesn’t know what the closet door looks like that I’m talking about (referring to other blog posts), here it is.  I picked these two doors off the garbage last night, they have great wood.  So I busted the doors apart for the slats.

Here’s the slats you get from those doors.

Here’s the dollhouse I need planters for, under the front windows.

I decided to work on the larger windows first.  So I measured to see how long I wanted the planter to be which was outside width of the windows.  I also measured for the depth I wanted the planters to be.  After cutting the pieces from the wood slats I glued them together.

Here the wood is glued together.  For the floor in the planter, I am using a scrap piece of wood.  I just place the planter onto the wood and draw lines around the base for the piece I need cut.

Here is the scrap piece of wood that I used.

Here is the piece cut out for the floor.  I glue this piece on the planters bottom.

I then glue in some of the green Styrofoam material that holds in fake flowers so I can add flowers. 

This is what they look like on the house with decorations and flowers.  If you want to see how I put the decorations on and flowers check out my blog on decorating a flower box.

Making a beautiful scene using a wooden clock shell with solar lite

This is the clock shell I will be using.  You could use any clock shell for this project.

To cover the hole in the back wall of the case you need a piece of hard cardboard, this piece I’m using I got off a cardboard placemat.

This is a picture of the circle I cut out to fit the hole in the back of the shell.

I needed to bring the inside bottom up so I used a Styrofoam material to bring it up.

The last piece of Styrofoam I cut, I glued on a piece of indoor/outdoor grass looking carpeting.

This is what it looks like on top of the Styrofoam.

For two of the items that I will be gluing down on the inside, I used a disco looking Christmas ball and the base of this cheap candle stick.

I glued the ball on top of the candlestick base.  I need to make two of these.

I will also be using this angel figurine.

Here I'm showing you the two pictures I got off the internet that I will be using.  The background picture which is a stairway to heaven and a saying I typed out, "Angels here on earth". I glued them down with tacky glue.

I painted the inside of the clock shell the same blue I painted one side of the cardboard circle I cut out from the cardboard earlier. Now I am gluing this piece into the back hole opening.

In this picture I glued in the two disco ornaments that I made earlier and the angel figurine.  I also glued in some small fake flowers.  You will also see some lace trim I glued around the opening.  The crown on the top was a piece I cut out of a playing card.

I had this very small piece of decorative trim lying around and I thought this is the perfect time to use it.

In this picture I did some detail painting using metallic gold paint from folk art collection.  I also glued on the trim and added some jewels to the bottom.

This is what the back of the clock shell looks like.  You can see the picture part of the cardboard I made so you can see it in the back, the other side has the picture of the stairway to heaven glued down onto it.  I drilled a hole in this circle for a solar light cap.  You will see what it looks like on the inside. As you can see on the clock case box it used to be a clock.  When I bought this at a garage sale it was just the case no clock was in it so I got it cheap.

Here is the solar light I’m using.  I bought it from Walmart, they sell single solar lights and it costed me 97 cents.

This is what it looked like lit up.

I used a piece I got from something I took apart, I put it around the solar light on the inside of the clock case.

Now this is what it looks like.

This is what the back looks like with the solar light.  Use your imagination and it will soar!

Making a solar tv for dollhouse from vintage coaster holder

This is a vintage coaster holder. You can use any coaster cabinet for the tv. 

This is what the inside looks like with the doors open.

This is plastic I got from a throw away container, I like to use these for a lot of my projects.

You need to cut a piece of the plastic to fit the size of the opening. Remember you need to have the doors to be able to close.

You will also need two pieces of wood.  They will be on the front plastic area. You will see in the pictures.

I had this picture which was part of a card that had a kitty on it. It's made of transparent plastic so I had to also cut a piece of paper for in back of the picture. So you need a piece of the plastic, a piece of white paper and the picture.  They all need to be the same size.

First is the plastic piece from container, on top of that you glue down the piece of white paper and then the kitty. In another blog I show you how to make a solar tv out of a picture you would download off the computer, you can check that one out also.  Let’s get back to this one.

Now you need to glue the two pieces of wood on the piece you just put together, you can see this in the photo.

Next, go on the internet to find images. Print out a picture of a tv panel, you will be using this next.

On the one piece of wood, you will be cutting the tv panel out of the printout and gluing it to the wide piece of wood.  On the thinner piece of wood, cut out a piece of the brown area on the picture and glue it down using tacky glue.

On the panel I cut a piece of wood dowel making a circle that could make the dial 3D, I covered it with aluminum foil or you can paint it silver I then glued it over the picture of the tv knob.  The line on top of the knob is a piece of a round toothpick which I also glued down and drew a black mark on it.  I then glued this whole piece to the inside of the coaster holder as you can see in the photo.  To make it easier what I do with my projects is put tacky glue in different areas of the piece and then putting dots of hot glue in the areas that don’t have tacky glue on it.  The tacky glue keeps the piece in its spot while the glue is setting.

Here’s what it looks like with the doors shut.  Next is the solar light getting installed to light it up.

In the back of the cabinet you need to drill a hole the size of the LED on the solar light so it can slide right in and be held into place.  If the solar light keeps sliding out use some black electrical tape to make it tighter.

In Walmart and the dollar tree you can buy cheap single solar lights. All you need is the top part of the light, with the solar cell and the LED.  But remember don’t throw out the other piece you need to recharge the solar panel for it to light up.

After putting the solar light into the hole in the back, this is what it looks like with the doors opened.

This is what it looks like with the doors shut. Use your imagination put in any picture maybe use a picture of a family member etc.. Use your imagination and it will soar!