The final phase of a church remodel solar light stained glass looking cabinet

 

 

This is the way this church looked as I was still working on it.  You can see the stained glass looking window on top of the front entrance.  This stained glass looking window was made of window film.  For the people out there that haven't heard of this item before it's made of a plastic type material and you can put it on your windows in your home to make it look different.  It comes in different designs.  I painted the stairs red I'm getting ready to make them look like brick.  I also put a statue on the right side of the church which you can see in the photo.

 

Here's a close up of the view looking in the entrance way.  Notice the light in the back of the pastors head it lights up due to a solar light top which I drilled a hole in the back of the cabinet I built and installed it in the hole.  

I painted all the trim work a red color, you can also see the stained glass windows better in this picture.

I framed a picture which came from some type of magazine.  You can also see the cabinet I built under it.

This view is looking down into the church.  If you can notice there are two candles on the altar.  I took two wooden decorative pieces and added a small dowel to the top of each.

I took some religious pictures and framed them and hung them on the wall in the back of the church.

This is another picture I framed and hung up the picture.  I didn't change any of the people that came with this church I figured it took someone a while and an imagination to make them so they are all still in the church.  The long benches that they are sitting on I added crosses to the outside areas which were made from toothpicks.  I also added the little holder in the back of the seats which holds the music books and bible.

I built an altar, this church didn't have one.  This is looking down into the church.  I put rug around different areas of the church the rest I built a wood slat floor out of popsicle sticks.



This is looking into the church, I love the way it looks.

I built shutters on the steeple out of popsicle sticks.

I painted the steeple red, black and white. 

I added a cross to the top of the steeple which was made of small dowels, I push it into half of a Styrofoam ball an painted it gold.

this is the side of this church.  As you can see I put a cardboard roof on the church and painted it black.  I also put in some little tree looking things.  In the area where the bell is I put a solar light to light up the inside of this area.

This is a close up of the side.

This is what the front turned out to look like.  The steps were painted to look like brick, I also hung a sign on the church which says Country Bible Church.  I put two decorative pieces on the doors.  I also built a red brick looking planter and put flowers in it.

This is a view of the front  of this church.

I also added an angel to the front.

This picture is looking down into the church.

This is the piano area at the front of this church. 

Another view looking down into the church.

Another view looking down into the church.

 

 

 A close up of the front middle of this church.

 

 

This is the view in front of the altar area.

 

 

 

In this picture you can see the signs I made and the decorative pieces on the doors.

This picture is looking in the front door.  The light that is hanging above the pastors head was made from the bottom of a mosaic solar light.

A close up of the little dolls that came with this church.

Here's what the front of this church looks like now.  Remember solar light can be installed inside of cabinets you make.  I hope this gave you some ideas.